Could you estimate how much money your company has invested in your IT server room or data center?These questions might be difficult to answer, but monitoring your valuable IT equipment certainly doesn't have to be.
Meet the TempDefender IT
The TempDefender keeps tabs on all the environmental levels that affect your servers, phone closets, data centers, and other equipment locations. The 8 discrete alarms on the back panel of the TempDefender monitor your dry contacts, such as motion sensors, UPS, smoke detectors, flood sensors, AC and room entry. The 4 D-wire sensor inputs on the back panel allow you to monitor up to 16 analog sensors, giving you the analog capacity to keep on top of environmental conditions at your site.
|D-Wire Sensor Inputs.||4 (up to 16 sensors via daisy chaining).|
|Control Relays.||1 or 3 (for Tower Lights) build options.|
|Interfaces.||Spring clamp connectors for discretes and relays. |
4 - RJ12 jacks for digital sensors.
1 RJ45 10/100BaseT Ethernet port.
1 Barrel plug connector for unit power.
(Other power connectors available upon request).
|Protocols.||SNMPv1 and SNMPv2c. |
HTTP or HTTPS.
Email (up to 8 email addresses).
|Dimensions.||4"L x 11.5"W x 1.7"H|
|Mounting.||19" rack or wall mount|
|Power Input.||+24VDC via 110VAC wall transformer (12V to 30VDC) |
-48VDC (-36 to -58VDC) optional
-24VDC (-18 to -36VDC) optional
+12VDC (+11 to +30VDC) optional
|Audible Notification.||Yes, via front panel speaker.|
|Operating Temperature.||32 to 140 degrees F (0 to 60 degrees C).|
|Operating Humidity.||0% - 95% non-condensing|
Temperature Monitor Guide
Data Center Management Techniques
The TempDefender IT includes an easy-to-navigate web interface that boasts several time-saving new tools. Menus load very quickly, and alarm statuses update automatically without requiring a page refresh. Look below for screens of the new setup wizards that make it easy to configure email and SNMP notification schedules.
Monitor Real-Time Sensor Readings - monitoring your analog values has never been easier. Each sensor displays its monitored values in gauge form - so you can easily see the status of your alarms in a graphical display.
Easy-to-Configure Analog Sensors - When you plug in a sensor, the TempDefender will automatically determine the sensor's type and necessary settings. You don't have to worry about reference values or other complicated settings. Just plugin the sensor, set your thresholds, and you're ready to go.
Keep tabs on your dry contact alarms: - Use the 8 discrete alarms to track thinks like tripped motion sensors, crossed temperature thresholds, and building entry.
|Controls menu up close|
|Monitor and Operate Controls: Get an at-a-glance view on the state of the control relays. You can latch and release controls from this screen.||Setup SNMP Traps: Select the event that must occur for SNMP traps. You have the option of receiving traps when alarms are triggered, when they clear, or both.|
|Setup Email Notifications: Whether you check emails at your desk or from your smartphone, the TempDefender keeps you in the loop. Have your SMTP server and port information handy during setup.||Creating Alarm Schedules: The built-in alarm scheduling tool allows you to account for employee time-off, after-hours monitoring, and shift changes. Enter in the specific day(s) and times you want to receive alarm notifications.|
D-Wire sensors are a way to track environmentals in your server room (wide range temperature support: -40 to 180 degrees F), PBX closet, or data center using minimum analog capacity. With the TempDefender's D-Wire sensors, you don't have to worry about analog capacity on your RTUs, tangled masses of sensors at your RTU, or even the trouble of wiring analog connectors.
D-Wire sensors from DPS use simple RJ-11 connectors, in and out, and allow you to chain up to 16 sensors to a single TempDefender D-Wire port. Your sensor chain can run a maximum of 600 feet, so you can run sensors out as far as you need to monitor your equipment, without having to place analog-capable RTUs in multiple places. Note: Internal D-Wire sensors (for internal temperature or internal voltage monitoring, for example) impact total sensor cable length.
The maximum length of a D-Wire daisy chain varies depending on the number of sensor nodes in the chain. A single sensor can receive power and transmit data over 600 feet of wire (for example, 3 sensors could have lengths less than or equal to 200 feet). Adding sensors to the chain consumes more power and reduces the maximum allowable wire length, as described in the table below:
Temperature Sensor. (D-PK-DSNSR-12001)
Temperature sensor that connects to the DPS Sensor network. This sensor can report live-analog values for monitoring temperature within +/-2 degrees F.
Temperature & Humidity Sensor. (D-PK-DSNSR-12002.00002)
Monitor temperature and humidity using the D-Wire Temperature and Humidity combination sensor. This device can accurately report the live-anlog values for temperature (+/- 2 degrees F) and humidity (+/0 4% RH).
Temperature Sensor w/ LED. (D-PK-DSNSR-12003)
An additional LED on this D-Wire Temperature Sensor gives a visual notification on the sensor. Much like the standard Temperature Sensor, this device will monitor live-analog values and can report temperature within +/- 2 degrees F of the actual value.
Batt.Cell Voltage Sensor. (D-PK-DSNSR-12004)
Battery Voltage Monitor & Temperature Probe that connects into the DPS Sensor network. This sensor is ideal for the digital inputs located on the Battery Voltage Monitor G2. Battery voltage range options include: 0VDC - 5VDC, 0VDC - 12VDC, 0VDC - 16VDC, and 0VDC - 60VDC.
Temperature External Sensor Probe. (D-PK-DSNSR-12008)
External 8 foot temperature probe that is compatible with the DPS sensor network. This sensor may be plugged directly into a D-Wire point of a DPS RTU or may be the terminating point of a daisy chain of D-wire sensors. Note: This sensor probe is not daisy chainable.
|Maximum Allowable D-Wire Cable Length|
|Sensor Nodes||Max Length (ft)|
|D-Wire Temperature and Humidity Sensor Full Specifications|
|Dimensions:||2.25"H x 1.625"W x .9375"D|
|Operating Temperature:||-40 to 180 degrees F (-40 to 82.2 degrees C)|
|Accuracy||+/- 2 degrees F and +/- 4% RH|
|Aggregate Length:||40 to 800 feet|
Data Center Management Techniques
D-Wire sensors are all powered directly from the Temp Defender D-Wire ports and support 4 analog thresholds (major under, minor under, minor over, major over). You can daisy chain these sensors together, up to 16 to a single TempDefender, in any configuration. Run 16 sensors (at a maximum of 600 feet) in a single chain or run four sensors from each of the TempDefender's D-Wire ports.
D-Wire Temperature Sensor
To receive a price quote or ROI analysis...
Get it by: 6:45 PM Wednesday (today)
It's 7:44 AM on Wednesday at our Fresno, CA, USA headquarters. We can start on your quote right away.
Would you rather just call us? We're in the office right now. Call 1-800-693-0351.